Filename [XVS20EX_09Editing.fm]
Masterpage:Left+
62 EN
Page 62 February 10, 2003 1:07 pm
EDITING (S-VHS DECK) (cont.)
Dubbing
(from DVD to S-VHS)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
ALoad a cassette and place a disc.
For the S-VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
APress x on the DVD deck to open the disc tray.
BPlace the disc in the disc tray.
CPress x on the DVD deck to close the disc tray.
BPrepare the S-VHS deck for dubbing.
APress S-VHS.
BPress p to select recording speed.
CSearch for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
CPrepare the DVD deck for dubbing.
APress DVD.
BSearch for the point where you want to start dubbing
by pressing 4, 5 or 3.
CPress 9 to pause playback a little before the start
point.
DPress and hold 7, then press 9.
●“dub” blinks on the front display panel.
DStart dubbing.
Press 4 to start playback.
EEnd dubbing.
Press 8.
NOTES:
●Set “ON SCREEN GUIDE” to “OFF” (墌pg. 77) if you do not
want to record the on-screen display for DVD discs during
dubbing.
●There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing
is not recorded.
●Turn on the TV and select the video channel (or AV
mode).
●Slide the TV/S-VHS/DVD switch to the right.
XVS20EX_01.book Page 62 Monday, February 10, 2003 1:07 PM