Filename [XVS20EX_07S-VHS.fm]
Masterpage:Left+
32 EN
Page 32 February 11, 2003 9:59 am
OPERATIONS ON S-VHS DECK (cont.)
Express Timer
Programming
If you do not know the SHOWVIEW number for the programme
you wish to record, use the following procedure to set your unit
to timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
ASelect the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
BAccess the SHOWVIEW screen.
Press PROG.
CAccess the Programme screen.
The front display panel looks like this:
DEnter the programme start time.
The front display panel looks like this:
EEnter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
●Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
FEnter the programme date.
Press DATE +/–.
●The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
●Make sure that the unit’s built-in clock is set properly.
●Insert a cassette with the safety tab in place. The unit will
come on automatically.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/S-VHS/DVD switch to the right.
Press START +/–. (If you’re
just starting out, “P1”
appears.)
Press START +/– to enter the
time you want recording to
start.
●Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
XVS20EX_07S-VHS.fm Page 32 Tuesday, February 11, 2003 10:00 AM