Masterpage:Right-No-Heading
EN 73
Filename [XVS20EX_10Subsidiary.fm]
Page 73 February 14, 2003 1:42 pm
* The default setting is bold in the table below.
8POWER SAVE
ON
OFF
When this function is set to “ON”, you can reduce the power consumption
while the unit is turned off.
NOTES:
●During Power Save mode:
— the front display panel will be turned off.
— the Just Clock function (墌pg. 84) does not work.
— the picture may be distorted momentarily when you turn on/off the unit.
●Power Save does not work when:
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant Timer Recording.
— the Automatic Satellite Programme Recording mode is engaged. (墌pg. 35)
— “L-2 SELECT” is set to “DECODER” or “SAT”. (墌pg. 61)
8VIDEO STABILIZER
ON
OFF
When this function is set to “ON”, you can automatically correct vertical
vibration in the picture when playing back unstable recordings made on
another recorder.
NOTES:
●When you finish viewing a tape, be sure to set this function to “OFF”.
●Regardless of the setting, this function has no effect during recording and during
special effects playback.
●The on-screen display may jitter vertically when this function is set to “ON”.
●To watch recordings with close-caption, set this function to “OFF”.
8S-VHS
ON
OFF
Your unit can record in S-VHS (Super VHS), S-VHS ET or VHS.
●To record in S-VHS:
Set “S-VHS” to “ON”. Then, insert a cassette marked “S-VHS”. The S-VHS
indicator lights up on the front display panel.
The S-VHS recording mode is selected.
●To record in S-VHS ET on a VHS cassette:
Set “S-VHS ET” to “ON”. (墌pg. 71) Then, insert a cassette marked “VHS”.
The S-VHS indicator lights up on the front display panel.
●To record in VHS:
Insert a cassette marked “VHS”.
Set “S-VHS ET” to “OFF”. (墌pg. 71)
The VHS recording mode is automatically selected regardless of the “S-VHS”
mode setting.
●To record in VHS on an S-VHS cassette:
Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the front
display panel. Then, set “S-VHS” to “OFF”. The S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS
indicator lights up on the front display panel regardless of the “S-VHS” mode setting.
XVS20EX_10Subsidiary.fm Page 73 Friday, February 14, 2003 1:42 PM