Filename [XVS20EX_07S-VHS.fm]
Masterpage:Left+
30 EN
Page 30 February 11, 2003 5:50 pm
OPERATIONS ON S-VHS DECK (cont.)
SHOWVIEW® Timer
Programming
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
ASelect the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
BAccess the SHOWVIEW screen.
The front display panel looks like this:
CEnter the SHOWVIEW number.
The SHOWVIEW number you enter appears on the front display
panel with only a 4-digit number:
DAccess the SHOWVIEW Program screen.
The front display panel shows the programme number. Pressing
" changes the display to the programme start time, the stop
time, the date, the tape speed then the channel position.
●If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
& and input a valid SHOWVIEW number.
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the unit’s built-in clock is set properly.
●Insert a cassette with the safety tab in place. The unit will
come on automatically.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/S-VHS/DVD switch to the right.
Press PROG.
Press the number keys to
enter the SHOWVIEW number
of a programme you wish to
record.
●If you make a mistake, press &
and input the correct number.
Press OK, then the
SHOWVIEW Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, or “TV PROG” shows “– –”, see steps B–
C of “Guide Program Number Set” on page 31 and set the
Guide Program number correctly.
XVS20EX_07S-VHS.fm Page 30 Tuesday, February 11, 2003 5:51 PM