Filename [XVS20EX_10Subsidiary.fm]
Masterpage:Left+
80 EN
Page 80 February 10, 2003 1:07 pm
SUBSIDIARY SETTINGS (cont.)

Manual Channel Set

Store channels that were not stored during Auto Set Up
(墌pg. 13), Preset Download (墌pg. 15) or Auto Channel Set
(墌pg. 78).
AAccess the Main Menu screen.
Press SET UP MENU.
BAccess the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e. The
Confirmation screen appears.
CSelect the channel position.
DSelect the band.
EInput the channel.
Press the number keys to input the channel number you
want to store.
●Input “0” before any single number entries.
●To input the registered station name (ID – 墌pg. 83), press e
until “– – – –” (ID setting) begins blinking, then press rt.
●For fine tuning adjustment, press e until “+/–” begins blinking,
then press rt. While tuning, “+” or “–” appears.
●When storing a channel that sends scrambled broadcasts,
press e until “OFF” (Decoder setting) blinks, then press rt to
set “DECODER” to “ON” (“OFF” is the default setting).
●When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
setting cannot be changed. (墌pg. 61)
FEnter new channel information.
Press OK and the Confirmation screen appears.
●Repeat steps C–F as necessary.
GClose the Confirmation screen.
Press SET UP MENU.
●To change positions, see “Change Station Channel Position”
(墌pg. 81).
●If you wish to set station names other than the ones registered
in your unit, see “Set Stations (B)” (墌pg. 82).
Press rt w e until an open
position in which you want to
store a channel begins
blinking, then press OK. The
Manual Channel Set screen
appears.
(Example) To store in position 12.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
Press rt to change the
band between CH (regular)
and CC (cable), then press e.
ATTENTION
Guide Program numbers are not set when channels are
stored manually. (墌pg. 31, “ATTENTION — Guide Program
Number Set”)
XVS20EX_01.book Page 80 Monday, February 10, 2003 1:07 PM