Masterpage:Right-No-Heading
EN 85
Filename [XVS20EX_10Subsidiary.fm]
Page 85 February 10, 2003 1:07 pm
ESet the date and time.
Press rt to set the time, then press OK or e. The
“DATE” display begins blinking. Repeat the same
procedure to set the date and year.
●When you set the time, press and hold rt to change the time
by 30 minutes.
●When you set the date, press and hold rt to change the date
by 15 days.
FSet Just Clock.
The default setting is “OFF”. Set as desired by pressing
rt, then press OK or e.
●For the Just clock function, refer to “Just Clock” on page 84.
●If you set to “OFF”, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
GSet the source channel position for clock
data.
The unit is preset to receive clock setting and adjustment
data from channel position 1.
Press rt to set the channel position to the number
representing the station transmitting clock setting data,
then press OK or e.
HStart the clock operation.
Press SET UP MENU.
NOTES:
●Just Clock (when set to “ON”) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
●Just Clock is not effective when:
— the unit’s power is on.
— the unit is in the Timer mode. (S-VHS deck only)
— a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
— the unit is in the Automatic Satellite Programme Recording
mode. (墌pg. 35) (S-VHS deck only)
— the unit is in the Power Save mode. (墌pg. 73) (S-VHS
deck only)
— “L-2 SELECT” is set to “SAT”. (墌pg. 61) (S-VHS deck only)
●If Just Clock is set to “ON”, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
●Just Clock may not function properly depending on the
reception condition.
XVS20EX_01.book Page 85 Monday, February 10, 2003 1:07 PM