Remote control buttons and functions
DISPLAY button
You can display the PR LIST, programme number or VIDEO terminal number on the screen.
Press the DISPLAY button.
Press the DISPLAY button changes the display as follows:
No indication
Choose a TV channel or a VIDEO terminal
1Press the DISPLAY button to display the PR LIST.
2Press the 6 and 5 buttons to choose a programme number or VIDEO terminal.
Then press the MENU/OK button.
•For programme numbers with the CHANNEL GUARD function set, the n (CHANNEL GUARD) mark is displayed next to the programme number in the PR LIST.
•The VIDEO terminals are registered after the programme number PR99.
•The AV channel (channel number 0) in the PR LIST will be chosen only if you connect the VCR to the TV with an aerial cable without connecting a video cable.
COLOUR SYSTEM button
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
Press the COLOUR SYSTEM button to choose the appropriate colour system.
AUTO:
This function detects a colour system from the input signal.
•The AUTO mode may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO mode, choose another colour system manually.
•The AUTO mode detects a colour system from the input signal and chooses the appropriate colour system automatically.
•For the colour systems in each country or region, see the table “BROADCASTING SYSTEMS” on page 12.
PAL/SECAM/NTSC3.58/NTSC4.43:
PAL, SECAM, or NTSC colour system.
SOUND SYSTEM button
The sound system is chosen automatically. However, if you cannot hear the sound normally even when the picture appears normally, choose the sound system manually.
Press the SOUND SYSTEM button to choose the appropriate sound system.
B/G | : B/G system |
I | : I system |
D/K | : D/K system |
M: M system
•This function does not work in the VIDEO mode.
•For the sound systems in each country or region, see the table “BROADCASTING SYSTEMS” on page 12.
11
