Using the TV’s menu
3Set the picture effect.
Press the 6 button to choose an item listed in the following table and press the 5 button to choose one of options.
•As explained in the table, the PICTURE EFFECT for the video inputs is set to OFF when shipped. To use it, you need to set it ON.
Item | Options |
PICTURE MODE | BRIGHT*, STANDARD, |
| SOFT |
DIGITAL VNR | AUTO*, MAX, OFF, MIN |
WHITE | COOL, MID*, WARM |
BALANCE |
|
DigiPure | AUTO*, MAX, OFF, MIN |
PICTURE | ON: |
EFFECT | Above picture effect |
| applies to the chosen |
| video input. |
| OFF*: |
| No picture effect applies. |
*: When shipped
•For details of each item, see “PICTURE MODE” on page 15, “DIGITAL VNR” on page 16, “WHITE BALANCE” on page 16, “DigiPure” on page 17.
•Pressing the number button “0” will return the picture effect to the factory set value.
4Press the MENU/OK button to complete the setting.
SOUND SETTING menu
STEREO / I•II
When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (sub I) or Bilingual II (sub II). When the stereo broadcasting is received poorly, you can change from stereo to mono sound so that you can hear the broadcast more clearly and easily.
s:Stereo sound
v: mono sound
t: Bilingual I (sub I)
u: Bilingual II (sub II)
MONO: Cancels the Multi Sound function, and the sound becomes monaural.
•The sound mode you can choose differs depending on the TV programme.
•This function does not work in the VIDEO modes.
•You can also operate the STEREO / I•II function with the svt/u button. For details, see “svt/u button” on page 10.
Adjusting the sound
You can adjust the sound to your liking.
BASS
You can adjust the low tone of the sound. 2 : weaker
3 : stronger
TREBLE
You can adjust the high tone of the sound. 2 : weaker
3 : stronger
20
