JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE manual Link Functions, „ Downloading the data to VCR

Setting up your TV

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” denotes that the ACI function is not working properly. Press the 2button to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PROGRAM function.

„Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function.

Caution

•Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.

•Only when the T-V LINK menu is being displayed, this operation is enabled.

T-V LINK

DOWNLOAD TV VCR

OK

EXIT

D0005-EN

1Turn on the VCR

2Press the a button

The data transmission begins.

DOWNLOAD TV VCR

TRANSFER. . . . .

D0037-EN

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu is changed over to another menu: The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu: Check the following three items. Then press the 2button to retry data transmission.

•Has the T-V LINK compatible VCR been connected to the EXT-2 terminal?

•Has the VCR power been turned on?

•Does the SCART cable that is connected to the EXT-2 terminal to T- V LINK compatible VCR have all proper connections?

T-V LINK FUNCTIONS

When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

To use T-V LINK functions:

A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable.

A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below. For details, refer to your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic Corporation)

“Data Logic” (a trademark of Metz Corporation)

“Easy Link” (a trademark of Phillips Corporation)

“Megalogic” (a trademark of Grundig Corporation)

“SMARTLINK” (a trademark of Sony Corporation)

ENGLISH

9