SET UP menu
5Press the green or red button repeatedly until the TV channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine- tune the TV channel.
If you cannot hear the normal sound even when the picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3button and choose a SYSTEM that has normal sound.
6Press the a button and register the TV channel to a Programme number (PR)
The normal EDIT menu is resumed.
LANGUAGE
The LANGUAGE setting which was performed in the “Initial settings” (page 6) can be changed.
1Choose LANGUAGE, then press the aor 3button
A
> LANGUAGE
OK
2Press the 5and 6buttons to choose a language. Then press the a button
PICTURE TILT
There are cases where the Earth’s magnetic force may make the picture tilt or make unnatural colours appear in the corner of the screen. If this happens, you can correct it.
1Choose PICTURE TILT, then press the a or 3button
The
>> PICTURE TILT
OK
2Press the 6buttons until the picture becomes level. Then press the a button
DECODER (EXT-2)
When connecting a Decoder with a
2)function to unscramble the scrambled TV channels.
1Turn on the Decoder power
2Display the TV channel capable of being unscrambled with the Decoder on the TV
Even if the Decoder is functioning, a scrambled picture appears at this time.
3Display the SET UP menu and choose DECODER (EXT-2)
SET UP
AUTO PROGRAM |
|
EDIT/MANUAL |
|
LANGUAGE |
|
PICTURE TILT |
|
ON | |
EXT SETTING |
|
OK
36
