JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE EXT Setting, „ S-IN S-VIDEO input, ID List, Dubbing

SET UP menu

4Press the 5buttons to choose

ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5buttons to choose OFF.

5Press the a button to complete the setting

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV VCR

OK

EXT SETTING

1Choose EXT SETTING, then press the a or 3button

The EXT SETTING menu appears.

> EXT SETTING

EXT-1	DUBBING
	EXT-2
EXT-3
EXT-5
TV	EXT-4
	ID LIST
OK
	S-IN
D0020-EN

ENGLISH

EXIT

D0005-EN

You can send the programme numbers data to a VCR with the T-V LINK function.

6Turn on the VCR, and then press the abutton to transmit the data to VCR

The T-V LINKmenu disappears once the data transmission ends.

7If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 6

2Follow the operation description of a function you want to use and operate the function

S-IN:

You can enjoy high-quality picture of the 2 S-VIDEO signal (Y/C signal).

ID LIST:

You can have a name corresponding to the devices connected for each EXT terminal.

DUBBING:

You can choose a signal source to be output from an EXT-2 terminal.

If for some reason the DECODER (EXT-

2)function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

• Has the Decoder been connected to the VCR properly according to the VCR and Decoder Instruction Manuals?

• Has the Decoder power been turned on?

• Can the TV channel be unscrambled with a Decoder?

• Is it necessary to change the VCR settings in order to connect the Decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction Manual.

„S-IN (S-VIDEO input)

When connecting a device (such as S-VHS VCR) which enables an S-VIDEO signal (Y/ C signal) to be output, you can enjoy high- quality picture of the S-VIDEO signal (Y/C signal).

37