JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE manual „ Insert, „ Manual, France

SET UP menu

•When the COUNTRY setting is not FRANCE, use a two-digit CH/CC number. When the COUNTRY setting is FRANCE, use a three-digit CH/CC number.

„INSERT

1Press the 6buttons to choose a Programme number (PR) for which you will register a new TV channel

2Press the green button and start the INSERT function

> EDIT

PR	ID	CH/CC
AV		CH/CC	32
01	BBC1	CH/CC	31
02
03
04
05
06
07		CH/CC

08CH/CC 31

„MANUAL

1Press the 6buttons to choose a Programme number (PR) to which you want to register a new TV channel

2Press the blue button to activate the MANUAL function

At the right side following the CH/CC number, the SYSTEM (broadcasting system) of the TV channel appears.

> MANUAL

PR	ID	CH/CC
AV		CH/CC	32
01	BBC1	CH/CC	31
02
03
04
05
06
07		CH/CC	31	(B / G)
08
09
		SEARCH+		FINE-
OK	SYSTEM
		SEARCH-		FINE+

ENGLISH

OK 0 9

CH/CC

D0034-EN

3Press the 6buttons to choose “CC” or “CH” according to the CH/ CC number of the TV channel

When the COUNTRY setting is

FRANCE:

Choose “CH1”, “CH2”, “CC1” or “CC2”.

To cancel the INSERT function: Press the bbutton.

D0035-EN

To cancel the MANUAL function:

Press the bbutton.

3Press the 3button to choose the SYSTEM (broadcasting system) for a TV channel you want to register

TV channel (SECAM-L system) from a French station:

Set the SYSTEM to “L”. If it is set to one other than “L”, you cannot receive the TV channel of the SECAM-L system.

4Press the Number buttons to enter the remaining CH/CC number

The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen.

•The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a picture in the no-signal state appears.

Other TV channels:

If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, it results in the fact that you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM again correctly so that no problem arises.

4Press the green or red button to search for a TV channel

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

35