JVC HV-L34PRO DigiPureMIN, Pull Down, Digipure function, Picture motion compensation function

Using the TV's menu

DigiPureMIN:

The Digipure function uses the latest in digital technology to give you a natural looking picture. The Digipure function includes the following two functions.

Digipure function:

This function helps to create a natural looking picture by eliminating unnecessary edges from high-contrast and crisp images. Conversely, for images with low-contrast, edges are added to produce a sharper, more detailed picture.

You can choose from the DigiPure function settings of AUTO,MIN and MAX.

Picture motion compensation function:

This function displays fast-moving pictures (for example, the players or ball in a football game) more smoothly and naturally on the screen.

•You cannot select the Digipure function when receiving the Progressive Video Signal (525P signal).

AUTO:

The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture, giving the best possible picture.

•If you set the DigiPure effect too high on a low-quality picture that contains a lot of noise, this may actually make the noise worse. It is recommended to use the AUTO setting if you can.

The level of the DigiPure effect is set to the minimun. When you set the DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN.

•The MIN setting is not suitable for high- quality pictures which contain very little noise.

OFF:

The DigiPure function is turned off.

PULL DOWN

The PULL DOWN function displays a cinema film picture more smoothly and naturally on the screen.

AUTO:

This function is turned on. Normally keep this function set to AUTO.

OFF:

This function is turned off.

•The motion may appear unnatural when viewing images with the NTSC colour system. To make the motion smoother, switch the PULL DOWN function from AUTO to OFF.

•You cannot select this function in the Twin pictures mode or the Picture in picture mode.

MAX:

The level of the DigiPure effect is set to the maximum. If you set the DigiPure function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX.

•The MAX setting is not suitable for low- quality pictures which contain a lot of noise.

22