JVC HX-Z30 manual Synchronized Recording, Load a disc Select a disc

Synchronized Recording

4 Press CD REC START. CD REC

By using Synchronized Recording, you can start and stop both disc play and tape recording at the same time. Everything on the disc goes onto the tape in the order it is on

“CD REC” appears on the display and the REC (recording) lamp flashes when recording starts.

START

the disc, or according to the order you have made for Program Play.

On the unit ONLY:

1 Press 0 EJECT and insert a recordable cassette with the exposed part of the tape down.

The cassette deck starts recording when the CD player starts playing.

When the recording is done, “CD REC FINISHED” scrolls on the display, and the REC (recording) lamp turns off. Both the cassette deck and the CD player stop automatically.

To stop recording, press 7 to create a 4-second
blank portion on the recording tape. (Remember a	T
/BEEP	U
	G	N
4-second blank is important when using Music

Scan—see page 20.)

To record on both sides—Reverse Mode On the unit ONLY:

Press REVERSE MODE so that the Reverse Mode indicator on the display lights

up like—.

REVERSE MODE

2 Load a disc.

3 Select a disc.

For audio CDs:

Press the corresponding disc number button (CD1 – CD5) where a disc is loaded in step 2, then press 7.

CD1	CD2	CD3	CD4	CD5
					T
					U
					N
				/BEEP	I
					N
					G

For MP3 discs:

You can select a track to start recording with.

1)Press the corresponding disc number button (CD1 – CD5) where a disc is loaded in step 2, then press 7.

CD1 CD2 CD3 CD4 CD5

2)Turn ¢/ 4to select the group, then press CD 3¥8.

PRESET

CD

•When using the Reverse Mode for Synchronized Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be re- recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2) first, recording will stop when only one (reverse) side of the tape is recorded.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up on the display like—.

When making Sleep Timer settings while doing

Synchronized Recording

Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.

3)Turn ¢ / 4 to select the track.

22