JVC InHR-J4404UM Engage Manual Tracking Mode, Adjust Manual Tracking, Start Repeat, Stop Repeat

14

PLAYBACKANDRECORDINGFEATURES(cont.)

PUSH JOG

LAY

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually.

ª £

q

CH 2 5/8 3

REW STOP FF

1	2	3
4	5	6
7	8	9
	0
	PLAY			CH
1••	3		•• Á	FF
REW
	7	8
¦				PAUSE

ENGAGE MANUAL

TRACKING MODE

1 During playback, press the CH5° buttons on the VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

2 Press CH5° on the VCR's front panel or remote. Press lightly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC TRACKING

3 Press the CH5° buttons on the VCR's front panel simultaneously.

●When automatic tracking is re-engaged, B.E.S.T. is automatically activated.

NOTES:

● To obtain a noiseless still picture it may be necessary to adjust

tracking in slow playback and then engage Pause.

● Manual tracking is possible during hands-free slow-motion.

During hands-free slow-motion playback, simply press CH5

4 ¢

STOP

SP

V C R

H M

PUSH JOG

PLAY

S

or ° on the VCR's front panel or remote to adjust tracking.

Repeat Playback

START REPEAT

1 Press and hold PLAY (until "PLAY" blinks on the front

display panel) during playback, then release.

●The entire tape is played back 20 times.

2	STOP REPEAT
	To stop, press STOP at any time.
	NOTE:

Pressing PLAY, REW, FF, PAUSE or PUSH JOG ªor

£also stops Repeat Playback.