JVC InHR-J4404UM manual Activate Counter, Memory, Return to Counter Position Zero

18

PLAYBACKANDRECORDINGFEATURES(cont.)

Counter Reset

POWER

REW

ª £

q

2 5/8 3

1

RESET COUNTER TO ZERO

Press C.RESET.

NOTE:

By pressing the DISPLAY button, you can change the display to show the counter reading, channel number or clock time. (Channel number is not displayed during playback.)

STOP FF

POWER

1	2	3
4	5	6
7	8	.MEMORY
		9
	0
		C

C.RESET

DISPLAY

1•• 3 •• Á FF

REW

¦ 7 8

4¢

STOP

Counter Memory

When activated, this feature returns the tape to counter position “zero”.

	ACTIVATE COUNTER
1	MEMORY
	Press C.RESET during playback at a point you want to have
	quick access to later. The counter reads “0H 00M 00S”.
	Then press C.MEMORY. The Counter Memory indicator
	in the front display panel lights.

RETURN TO COUNTER

POSITION ZERO

2 Press STOP (during playback), then press REW or FF. The tape rewinds or fast-forwards and stops at approxi- mately “0H 00M 00S” automatically.

● To cancel Counter Memory, press C.MEMORY.

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant		+	+	+
ReView. The position of " " in	B				E
relation to "B" (Beginning) or "E"
(End) shows you where you are on			COUNT		0:33:27
the tape.

NOTE:

SUPERIMPOSE must be set to ON, or the indicator will not appear (☞ pg. 16).

Next Function Memory

You can set your VCR's power to go off automatically after the tape is fully rewound. Before starting, make sure the VCR is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds.

NOTE:

If you want the power to be turned off automatically when the counter reads “0H00M00S” (instead of at the beginning of the tape), press C.MEMORY so that the “M” mark appears before pressing REW.