32
SPECIAL
FEATURES
(cont.)
Cable Box Multi-Brand Remote Control
1 2 3
4 5 6
NUMBER
7 8 9
0
ENTER
1••3
¦ 7
4
POWER
CH
••Á
8
¢
The VCR's remote control can control functions on the brands of cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
TURN ON THE CABLE BOX
1 Turn the power on using the cable box’s remote control.
ENTER CABLE BOX BRAND
2 While holding down CABLE on the VCR's remote control, use the NUMBER keys to enter the cable box brand number from the chart at bottom left and then press STOP.
Follow the example shown below.
●Once you have set the remote control to operate the cable box, you don't have to repeat this step until you replace the remote control's batteries.
STOP
OPERATE CABLE BOX
3 Press CABLE and POWER in succession to see if the cable box’s power goes off as it should. If it does, try other functions.
●To operate your cable box, press CABLE first, then press the corresponding button: POWER, CH 5° and NUMBER keys (or ENTER).
●For some brands of cable box, you must press ENTER after having pressed the NUMBER keys.
CABLE BOX BRAND NAME | BRAND CODE |
CURTIS | 08, 09 |
GEMINI | 17 |
GENERAL INSTRUMENTS | 10, 11, 12, 13, 14, 15, 16, 17 |
JERROLD | 10, 11, 12, 13, 14, 15, 16, 17 |
PANASONIC | 03, 04, 05 |
RCA | 03, 04, 05 |
SAMSUNG | 17, 18 |
SCIENTIFIC ATLANTA | 08, 09 |
SL MARX | 17, 18 |
SPRUCER | 03, 04, 05 |
TELEVIEW | 17, 18 |
TOCOM | 01, 02 |
VIDEOWAY | 06, 07 |
ZENITH | 06, 07 |
|
|
NOTES:
●Depending on the kind of cable box, there may be cases where some or all functions cannot be operated using the remote control.
●It's not possible to set the remote control for both your cable box and your satellite receiver at the same time; you can only set the remote control to the brand of either one.
●You have to subscribe to a cable service to receive cable channels.
(Ex.) To set remote control to TOCOM 01:
CABLE | 0/AUX | 1 | 7STOP |
|
|
| Release |
Hold |
| Press in succession | |
down |
|
|
|
