4INSTALLINGYOURNEWVCR

Basic Connections

Antenna or Cable

Coaxial Cable

 

 

Flat Feeder

 

AC Power

Matching Transformer

 

 

 

 

Cord

 

 

 

Back of VCR

ANT. IN (Antenna or

 

 

 

RF

 

 

Cable input)

AC Outlet

 

OUT

 

 

Connect the power plug to an

 

AC outlet before installing the

RF Cable

lithium battery. pg. 5

(provided)

 

1

2

3

4

CHECK CONTENTS

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (pg. 41).

SITUATE VCR

Place the VCR on a stable, horizontal surface.

CONNECT VCR TO TV

The connection method you use depends on the type of TV you have.

RF Connection

To Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV antenna from the TV.

b– Connect the TV antenna cable to the ANT. IN jack on the rear of the VCR.

c– Connect the supplied RF cable between the RF OUT jack on the rear of the VCR and the TV’s antenna terminal.

AV Connection

To Connect To A TV With AV Input Terminals . . .

a– Connect the antenna, VCR and TV as shown in the illustration.

b– Connect an Audio/Video Cable (not supplied) between the AUDIO OUT and VIDEO OUT jacks on the rear of the VCR and the AV IN jacks on the TV.

CONNECT VCR TO

POWER SOURCE

Connect the power plug to an AC outlet.

TV

75 ohm terminal

300 ohm terminal

5

FINAL PREPARATION FOR USE

Select the VCR channel (3 or 4) by setting the switch on the rear of the VCR as shown in the illustration.

Turn on the power to the TV. You are now able to perform simple playback (pg. 11) and recording (pg. 12).

Back of VCR

VIDEO

CH3 CH4

NOTES:

The VCR channel is the channel on the TV which will display the audio and video signals from the VCR. The VCR's CH3- CH4 switch sets the VCR channel to CH3 or CH4.

The CH3–CH4 switch is preset to the CH3 position. Set to CH4 if CH3 is used for broadcasting in your area.

If your TV has no AV input terminals, set the channel on the TV to correspond to the CH3–CH4 switch on the back of the VCR.

Even if your TV has AV input terminals, you must connect it to the VCR using an RF cable in order to record one show while watching another (pg. 22).

For full identification of the VCR's rear panel, refer to the Index (REAR VIEW pg. 39).

Page 4
Image 4
JVC InHR-J4404UM manual Basic Connections