Connectors Controls, and Indicators (Remote Control Unit)
Remote Control Unit
POWER
1
SOURCE SELECT
2
DUBBING | LOOP |
LOCK | PROTECT |
4 | 3 |
(MONITORSELECT ) |
|
REMOTE CONTROL UNIT
FOR
AV SELECTOR
1POWER button
Press to turn the power ON or OFF.
2SOURCE SELECT buttons (☞ p. 11, 13, 15, 17) Press to select an input component.
3LOOP PROTECT button (☞ p. 13, 15, 19)
Press this button when you don’t want the signal selected by the SOURCE SELECT button to be sent to the corre- sponding output terminal.
ON: The input (video/audio) signals are not output at an output terminal having the same number as the in- put terminal.
OFF: The input (video/audio) signals are output at the out- put terminal having the same number as the input terminal.
4DUBBING LOCK button (☞ p. 14, 20)
(MONITOR SELECT)
Press to disable the POWER and LOOP PROTECT button and fix the circuit output to the output terminals. This but- ton is useful for preventing accidental or erroneous opera- tion during dubbing.
•When one of the SOURCE SELECT buttons is pressed while the DUBBING LOCK is activated, only the VIDEO output from the MONITOR output is switched without changing the video signal being dubbed through the VIDEO output.