Using Bluetooth® devices

Available only when a USB Bluetooth Adapter (separately purchased) is connected.

By connecting a USB Bluetooth Adapter and a microphone unit (with an separately purchased accessory kit, KS-BTA50) to this unit, you can use a Bluetooth device with this unit.

Once the USB Bluetooth Adapter is attached, this unit is always available for pairing.

• Only one USB Bluetooth Adapter can be detected at a time.

This unit supports the following Bluetooth profiles

•HFP (Hands-Free Profile) 1.5

•OPP (Object Push Profile) 1.1

•PBAP (Phonebook Access Profile) 1.0

•A2DP (Advanced Audio Distribution Profile) 1.2

•AVRCP (Audio/Video Remote Control Profile) 1.3

Connecting a Bluetooth device

When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device.

•Once the connection is established, it is registered in the unit even if you reset the unit. Up to five devices can be registered in total. “PAIRING FULL” scrolls on the display if you tried to pair the 6th device.

•This unit supports Secure Simple Pairing (SSP).

•Pairing sequence may be different from what is described below.

•A maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time.

1

]Turns on the power.

2

USB input terminal

3Use the Bluetooth device to search and select “JVC Unit.”

•For some Bluetooth devices, you may need to enter the PIN code first after search.

4Perform one of the following pairing operations (what appear depends on the Bluetooth device pairing process).

or

USB cable from the

rear of the unit USB Bluetooth Adapter (separately purchased)

]Make sure USB Bluetooth Adapter is connected to one of the USB input terminals.

(A)If “BT PAIRING” flashes, then “[Device name]” = “VOL – YES” =

“BACK – NO” scrolls on the display.

]Select “YES” to start the pairing process.

If “PAIRING” appears...

]Operate the Bluetooth device to accept.

Continued...

ENGLISH 11