If DIAL NUMBER is selected in step 2...

Enter the phone number to dial.

Turn the control dial to select a number or character (see table below), press

4/¢ to move to the entry position. Once you finished entering the number, press the control dial to confirm.

If VOICE is selected in step 2...

Speak the name (registered words) you want to call when “WAIT VOICE” = “[Device name]” scrolls on the display.

•Press and hold FUNC. to activate voice dial operation directly if only one phone is connected.

If two phones are connected, pressing and holding FUNC. will enter “Phone list” screen. Turn the control dial to select a phone to activate voice dial operation, then press to confirm.

•Only accessible when the connected mobile phone has the voice recognition system.

•“NOT SUPPORT” appears if the connected phone does not support this feature.

If SETTINGS is selected in step 2...

Turn the control dial to select an item (see the following), then press the control dial to confirm.

The following settings are applicable to the paired device. If another device is paired, make the settings again.

•P. BOOK SEL*

PB IN PHONE [Initial] : The unit browses the phonebook of the connected phone.

PB IN UNIT : The unit browses the phonebook registered in the unit. (To copy the phonebook memory, see <P. BOOK WAIT> on page 16.)

•If the phonebook contains many numbers, you can fast search (±10, ±100, ±1 000) through the phonebook by turning the control dial quickly.

•To search through the phonebook, see page 14. * Selectable only when the connected phone

supports PBAP.

•AUTO ANSWER

ON : The unit answers the incoming calls

automatically. / OFF [Initial] : The unit does not answer the calls automatically. Press FUNC. or the control dial to answer.

•RING TONE

IN UNIT [Initial] : The unit rings to alert you when a call/Text Message comes in.

–CALL : Select your preferred ring tone when a call comes in [ TONE1 — 5].

–MESSAGE : Select your preferred ring tone when a text message comes in

[ TONE1 — 5].

•Default ring tone is different according to the paired device.

IN PHONE : The unit rings using the connected phones’ ring tone to alert you when a call/Text Message comes in. (The connected mobile phone rings if it does not support this feature.)

•RING COLOR

29 preset colors [ Initial: 06] : When a call/text message comes in, the display will flash in the selected color. (The display will change to the original color when the call is answered or the incoming call stops.) / OFF : Cancels.

•NR/EC MODE

ON [Initial] : The unit adjusts the Noise Reduction and Echo Cancellation of the microphone connected to the unit for clearer sound. / OFF : Cancels.

•MIC LEVEL

Adjust the sensitivity [ 01/ 02/ 03] of the microphone connected to the unit. [ Initial: 02]

•MSG NOTICE

ON [Initial] : The unit informs you of the arrival of a message by ringing and displaying “RCV MESSAGE” = “[Device name].” /

OFF : The unit does not inform you of the arrival of a message.

Continued...

ENGLISH 13