USB playback
Bluetooth
| Symptom | Remedy/Cause |
| “READING” keeps flashing on the display. | A longer readout time is required. Do not use too many hierarchical |
| ||
|
| levels and folders. / Turn off the power then on again. / Reattach the |
|
| USB device again. |
|
|
|
| Noise is generated. | Skip to another file. |
|
|
|
| While playing a track, sound is sometimes | The tracks have not been properly copied into the USB device. Copy |
| interrupted. | tracks again into the USB device, and try again. |
|
|
|
| Tracks/folders are not played back in the | The playback order is determined by the file name. Folders with |
| order you have intended. | numbers on the initial of their names are sorted in numerical order. |
|
| However, folders with no numbers on the initial of their names are |
|
| sorted according to the file system of the USB device. |
|
|
|
| “USB ERROR” = “REMOVE USB” = | An |
| “PWR OFF/ON” scrolls on the display. |
|
|
|
|
| “NO FILE” appears on the display. | Check whether the selected folder, the connected USB device, |
|
| or the iPod/iPhone contains a playable file. |
|
|
|
| “NOT SUPPORT” appears and track skips. | Check whether the track is a playable file format. |
|
|
|
| “CANNOT PLAY” flashes on the display. / | Check whether the connected USB device is compatible with this |
| “NO USB” appears on the display. / The | unit. / Reattach the USB device again. |
| unit cannot detect the USB device. |
|
| “BT FRONT/ BT REAR” cannot be selected. | Check the <SRC SELECT> = <BT AUDIO> setting. (page 27) |
|
|
|
| No Bluetooth device is detected. | Search from the Bluetooth device again. / Reset the unit, then |
|
| search from the Bluetooth device again. |
|
|
|
| Pairing cannot be made. | Make sure you have entered the same PIN code to both the unit |
|
| and target device. / Disconnect the Bluetooth device and try pairing |
|
| again. |
|
|
|
| Echo or noise occurs. | Adjust the microphone unit’s position. |
|
|
|
| Phone sound quality is poor. | Reduce the distance between the unit and the Bluetooth mobile |
|
| phone. / Move the car to a place where you can get a better signal |
|
| reception. |
|
|
|
| The unit does not response when you | You may have tried to copy the same entries (as stored) to the unit. |
| tried to copy the phonebook to the unit. | Press DISP or BACK to exit. |
|
|
|
| The sound is interrupted or skipped during | Reduce the distance between the unit and the Bluetooth audio |
| playback of a Bluetooth audio player. | player. / Disconnect the device connected for Bluetooth Phone. / |
|
| Turn off, then turn on the unit. / Connect the player again, when |
|
| the sound is not yet restored. |
|
|
|
| The connected audio player cannot be | Check whether the connected audio player supports AVRCP |
| controlled. | (Audio/Video Remote Control Profile). (Operations depend on the |
|
| connected audio player.) / Disconnect and connect the Bluetooth |
|
| player again. |
|
|
|
Continued...
ENGLISH 29