If “PAIRING” = “PIN 0000” scrolls on

the display...

]Enter a PIN (Personal Identification Number) code to the Bluetooth device.

• You can change the PIN code of your choice before pairing. (page 16) [ Initial: 0000 ]

(B)If “BT PAIRING” flashes, then “[Device name]” = “XXXXXX” = “VOL – YES” = “BACK – NO” scrolls on the display.

] Check to be sure the passkey appears on the unit and Bluetooth device is the same. Then, confirm the passkey on the unit by pressing the control dial. Operate the Bluetooth device to confirm the passkey.

• “XXXXXX” is a 6-digit numeric code that appear in different combination (even if the device is the same) each time pairing is made.

5After pairing is successful, the unit will establish Bluetooth connection with the Bluetooth device*. ( lights up on the

display.)

•The device remains registered even after you disconnect the device. Use <CONNECT PH/ CONNECT AU> (or activate <AUTO CNNCT>, page 16) to connect the same device from next time on.

*Some devices may not be able to connect to the unit after pairing. Connect the device to the unit manually.

To delete a registered device

1Press and hold MENU.

2Turn the control dial to select <BLUETOOTH>, then press to confirm.

3Turn the control dial to select <DELETE PAIR>, then press to confirm.

4Turn the control dial to select a device

you want to delete, then press to confirm.

5Turn the control dial to select <DELETE YES>, then press to confirm. “DELETED” appears when the device is deleted.

If < DELETE NO> is selected, the unit returns to step 4 above.

To connect/disconnect a registered device

1Press and hold MENU.

2Turn the control dial to select <BLUETOOTH>, then press to confirm.

3Turn the control dial to select <CONNECT PH/ CONNECT AU> or <DISCONNT PH/ DISCONNT AU>, then press to confirm.

4Turn the control dial to select a device you want to connect/disconnect, then press to confirm.

“CONNECTED/ DISCONNECT” = “[Device name]” scrolls on the display when the device is connected/disconnected.

Using a Bluetooth mobile phone

Making a call

1

]Enter “Hands-Free” screen.

2

]Select a calling method or make a setting. (DIALED/ RECEIVED/ MISSED CALL/ PHONEBOOK/ DIAL NUMBER/ VOICE/ SETTINGS)

12ENGLISH

3If DIALED/ RECEIVED/ MISSED CALL/ PHONEBOOK is selected in step 2...

Turn the control dial to select the name/ phone number you want to call, then press the control dial to confirm.

•“NO HISTORY” appears if there is no history stored.

•“NO DATA” or “SEND P. BOOK” j “MANUALLY” appears depending on the “P. BOOK SEL” settings. (page 13)