| Menu item | Selectable setting, [ Initial: Underlined ] |
|
|
CONNECT PH *1/ | Turn the control dial to select a device you want to connect. “CONNECTED” = “[Device Name]” |
| CONNECT AU | scrolls on the display when the device is connected. |
|
|
| DISCONNT PH/ | Turn the control dial to select a device you want to disconnect. “DISCONNECT” = |
| DISCONNT AU | “[Device Name]” scrolls on the display when the device is disconnected. |
|
|
| DELETE PAIR | Turn the control dial to select the device you want to delete, then press the control dial to confirm. |
| DELETE YES : Confirm to delete the selected device. / DELETE NO : Cancels. |
|
|
| P. BOOK WAIT | You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need |
| to enter the PIN code or verify passkey from the mobile phone to do pairing. You can transfer a |
| maximum of 400 numbers. |
|
|
| SET PINCODE | You can change the PIN code of your choice before pairing |
| [ Initial: 0000 ] |
| Turn the control dial to select a number, press 4 /¢ to move to the entry position, |
| then press the control dial to confirm the entry. |
|
|
| AUTO CNNCT | ON : The connection is established automatically with the registered Bluetooth device when |
| you turn on the unit. / OFF : The unit does not connect the Bluetooth device automatically. Use |
| <CONNECT PH/ CONNECT AU> to connect. |
|
|
| INITIALIZE | YES : Initialize all the Bluetooth settings (including stored pairing, phonebook, and etc.). / |
| NO : Cancels. |
|
|
| INFORMATION | PH CNNT DEV *2 : Shows connected phone name. / AU CNNT DEV *2 : Shows |
| connected audio device name. / MY BT NAME : Shows the unit name (JVC Unit). / |
| MY ADDRESS : Shows address of USB Bluetooth Adapter. |
|
|
*1 Will not display if two Bluetooth phones are connected at the same time. *2 Displayed only when a Bluetooth phone/audio player is connected.
Additional information•If you wish to perform complicated operations (such as dialing the numbers, using phonebook, etc.), stop your car in a safe place.
•Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
•If you connect a different USB Bluetooth Adapter, all the registered devices and information will be cleared.
•This unit may not work for some Bluetooth devices.
•Connecting condition may vary depending on the circumstances around you.
•If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
•When the unit is turned off, the device is disconnected.
•If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/index.html> (English website only).
16ENGLISH