To select a contact from the phonebook

1Select PHONEBOOK calling method. (page 12)

2Press 5/∞ to show the search menu (A to Z, 0 to 9, and OTHERS).

“OTHERS” appears if the 1st character is not A to Z, or 0 to 9, such as #, —, !, and etc.

3Press 5/∞ to select your desired character, then press the control dial to confirm.

The name list of the selected character appears.

4Turn the control dial to select your desired contact, then press to confirm.

•Only the existing characters will be shown on the search menu.

•Press and hold 5/∞ to continuously change the character of the search menu.

•If your phonebook contains many contacts, searching take some time.

To delete a contact (name/phone number)

Only when “PB IN UNIT” is selected for “P. BOOK SEL”. (page 13)

1Press FUNC. to enter “Hands-Free” screen.

2 Display the list of name/phone numbers using one of the calling methods. (page 12)

3 Turn the control dial to select the name/ phone number you want to delete.

4 Press and hold BACK to enter the “Delete Entries” screen.

5 Turn the control dial to select “DELETE” or “DELETE ALL.”

•If “DELETE” is selected, the selected name/ phone number in step 3 is deleted.

•If “DELETE ALL” is selected, the listed numbers in step 2 selection are deleted.

6Press the control dial to confirm.

Receiving/ending a phone call

When a call comes in, the source is automatically changed to “BT FRONT/ BT REAR.”

•“RECEIVING” appears for a while, then the phone number or name appears.

•The display will flash in blue. (“RING COLOR,” page 13)

14ENGLISH

When <AUTO ANSWER> is activated....

The unit answers the incoming calls automatically.

•Press FUNC. or the control dial to answer the incoming call when <AUTO ANSWER> is deactivated.

During a phone call conversation...

•Turn the control dial to adjust the phone volume level (00 – 50). [ Initial: VOLUME 15 ] The adjustment made will not affect the other sources.

•Press 5/∞ to adjust the microphone sensitivity (01 – 03). (As the number increases, the microphone becomes more sensitive.)

•Press 4/¢ to turn on/off the Noise Reduction and Echo Cancelation mode.

To end an incoming call, press and hold FUNC. or the control dial.

Using the remote controller

5/∞/2/3/SOURCE: [Press] Answers calls. [Hold] Rejects calls.

To switch conversation media (the unit/ mobile phone)

Press the control dial during a phone call conversation, then continue your conversation using the other media.

•Operations may be different according to the connected Bluetooth device.

To switch between two connected mobile phones

When two mobile phones are connected to the unit, you can access to both “Hands-Free” screens.

Press FUNC. to access to the 1st phone’s “Hands-Free” screen, press again to access to the 2nd phone’s “Hands-Free” screen.

•To return to the 1st phone’s “Hands-Free” screen, press BACK.

Arriving of a text message

When a text message comes in, the unit rings if your mobile phone is compatible with text message and “MSG NOTICE” is set to “ON”.

(page 13)

•You cannot read, edit, or send a message through the unit.