Indications

Selectable settings, [reference page]

 

 

WOOFER*3

LOW: Frequencies lower than 80 Hz are sent to the subwoofer.

Subwoofer cutoff

MID: [Initial]; Frequencies lower than 120 Hz are sent to the

frequency

subwoofer.

 

HIGH: Frequencies lower than 160 Hz are sent to the subwoofer.

 

 

 

HPF*3

HPF ON:

The cut-off frequency is chosen automatically

High pass filter

 

according to the WOOFER setting (LOW/MID/

 

 

HIGH) so that you can enjoy the low frequency effect

 

 

(LFE) purely from the subwoofer if it is connected.

 

HPF OFF:

[Initial]; Cancels.

 

 

 

EXT IN*6

CHANGER:

[Initial]; To use a JVC CD changer, [40].

External input

EXT IN:

To use any external component (other than SIRIUS

 

 

DLP), [44].

 

 

TAG DISP

TAG ON: [Initial]; Shows the ID3 tag while playing MP3/WMA

Tag display

tracks, [42].

 

TAG OFF: Cancels.

 

 

REAR SPK*3, *5

ON: [Initial]; Select this to turn on the rear speaker output.

Rear speaker output

OFF: Cancels.

 

 

AMP GAIN

You can change the maximum volume level of this receiver.

Amplifier gain control

LOW PWR: VOL 00 – VOL 30 (Select this if the maximum power

 

 

of the speaker is less than 50 W to prevent them from

 

 

damaging the speaker.)

 

HIGH PWR: [Initial]; VOL 00 – VOL 50

 

OFF*3:

Deactivates the built-in amplifier.

 

 

 

AREA

AREA EU:

Select this when using the receiver in an area other

Tuner channel interval

 

than North and South America. (FM: 50 kHz—manual

 

 

tuning, 100 kHz—auto search; AM: 9 kHz)

 

AREA US:

[Initial]; Select this when using the receiver in North

 

 

or South America. (FM: 200 kHz; AM: 10 kHz)

*5 Displayed only when Dual Zone is activated (see page 32). *6 Cannot be selected if the source is “CD-CH” or “EXT IN.”

ENGLISH

37

Page 37
Image 37
JVC KD-DV5100, KD-ADV6160 manual Hpf Off