JVC KD-AV7100 Tint, Color, Contrast, On the remote:, Dimmer function, For Dimmer Off:, 3Finish the procedure, 2Adjust the brightness, Turning off the monitor

Adjusting the monitor brightness 1Display the adjustment bar.

P-04	105.9	MHz
P-05	107.9	MHz
AS PS SCAN			10	DISP

•If no operation is done for about 5 seconds, the adjustment bar will disappear.

2Adjust the brightness.3Finish the procedure.

Picture adjustment for “AV-IN” and “CAMERA”

On the remote:

1	ENGLISH
2

3

Turning off the monitor

On the touch panel only:

1	TUNER				3:45 PM
				ST FM-1	87.5 MHz
		P-01	87.7	MHz
		P-02	89.9	MHz
2	Main Menu				BACK
	TUNER	DISC		AUX IN	AV-IN
	USB	iPod		SD	CAMERA

MONITOR

When the source is “AV-IN” or “CAMERA” and video signals are coming in, “Picture Menu” screen

SET UP

OFF

appears in step 1 above.

Press PICTURE on the unit or on the remote to select an item to adjust, then adjust it by following step 2 above.

Sharpness	Adjust the sharpness.
Color	Adjust the color of the picture—
	lighter or darker.
Contrast	Adjust the contrast.
Brightness	Adjust if the picture is too bright or
	too dark.
Tint	Adjust the tint if the human skin
	color is unnatural.

To turn on the monitor, touch the monitor.

• Pressing any button will also turn on the monitor.

Dimmer function

According to the use of the dimmer function, connect the ILLUMI lead as follows:

•For Auto Dimmer: Connect it to the car headlight switch. When you turn on the car lights, dimmer starts working—Auto Dimmer

•For Constant Dimmer: Connect it to the car battery (constant 12 V). Dimmer works whenever you turn on the power.

•For Dimmer Off: Connect it to nowhere.

See also the Installation/Connection Manual (separate volume).

11OPERATIONS