iPod

AV-IN

Symptoms

Remedies/Causes

• The iPod does not turn on or does not work.

• Check the connecting cable and its connection.

 

• Update the firmware version.

 

• Charge the battery.

• The sound is distorted.

Deactivate the equalizer either on this unit or the iPod.

• Playback stops.

The headphones are disconnected during playback. Turn off

 

the unit’s power and turn on it again.

• No sounds can be heard when connecting an

• Disconnect the headphones from the iPod nano.

iPod nano.

• Update the firmware version of the iPod nano.

• “No Files” appears on the monitor.

No tracks are stored. Import tracks to the iPod.

• The iPod’s controls do not work after

Reset the iPod.

disconnecting from this unit.

 

• “Cannot play” appears on the monitor.

Communication error occurs. Disconnect and connect the

 

cable to the iPod again.

• “NO VIDEO SIGNAL” appears on the monitor.

• Turn on the video component if it is not on.

 

• Connect the video component correctly.

• Playback picture is not clear and legible.

Adjust the monitor brightness. (☞page 11)

• No sounds can be heard.

Check the connecting cable and its connection.

ENGLISH

53REFERENCES