USB operations

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit. This unit can play the JPEG/MPEG1/MPEG2*/MP3/WMA files stored in USB mass storage class device.

•You can operate the USB device in the same way you operate the files on discs. (☞pages 17 to 28)

•Playback will stop after playing back all tracks in the USB mass storage class device.

•If you start playback again after changing the source or turning off the unit, the playback starts from the first track.

•Make sure all important data has been backed up.

*Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).

ENGLISH

~

~Open the front cover.

ŸConnect a USB mass storage class device.

!Select “USB” for the source.

(☞page 10)

• Open the monitor if necessary.

Caution:

Ÿ

•You cannot connect a computer to

the USB () terminal of the unit.

•Avoid using the USB device if it might hinder your safety driving.

•Do not pull out and attach the USB device repeatedly while “Reading...” is displayed on the monitor screen.

•Do not start the car engine if a USB device is connected.

•Stop playback before disconnecting a USB device.

•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

•For more details about USB operations, ☞page 49

33OPERATIONS