JVC KD-AV7100 No, Yes, Off, On, No, Yes, 4:3, 16:9, Underlined, Menu items, Calibration, TS Calibrate, Aspect Ratio, Screen saver, Set Password*3, Load Factory*4

Initial: Underlined

MISC

Menu items	Selectable settings, [reference page]
TS Calibrate	Correct the accuracy of the touch sensor (see “Calibration” below).
	No, Yes
Set Password*3	Enter the password (4-digit), ☞[25]
Parental control	Select the restriction level for DVD Video playback, ☞[25]
	Kid Safe (most restrictive), G, PG, PG-13, PG-R, R, NC-17, Adult (least restrictive)
Aspect Ratio	Select the aspect ratio of the picture.
	4:3, 16:9
Screen saver	Activate/deactivate the screen saver.
	Off, On
Load Factory*4	Select “Yes” to reset the unit.
	No, Yes
	• When you select “Yes,” the confirmation message appears. Select “Yes.” The unit
	turns off, then turn on again.
DivX Registration	This unit has its own Registration Code. Once you have played back a file with which
	the Registration Code recorded, this unit’s Registration Code is overwritten for
	copyright protection.

ENGLISH

Calibration

After selecting “Yes” for “TS Calibrate,” the guidance for calibration appears on the monitor as described on the right.

Touch ““ which appears at each corner (A – D) in turn.

•Touch ““ slowly and carefully. Touch ““ repeatedly until the next marker appears if it does not appear by touching once.

•When the unit detects that you have touched all ““ accurately, the unit exits the calibration screen.

AD

Please press point A at upper left corner

BC

*1 You cannot change the “DVD Gain” setting when “DownMix” is set to “FULL 6CH.” (☞page 43) *2 The setting for “DVD Gain” is applied also to SD and USB.

*3 Remember your password or make a note of it. You need to enter the password to change the setting or cancel restriction.

*4 The settings for the clock (“Clock”) and parental control (“Set Password” and “Parental control”) are not initialized.

45SETTINGS