Using the Bluetooth® devices

For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. See also page 40.

•Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.

•Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function.

To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish Bluetooth wireless connection between the unit and the device.

•Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be registered in total.

•Only one device can be connected at a time for each source (“BT-PHONE” and “BT-AUDIO”).

ENGLISH

Registering a Bluetooth device

Registration (Pairing) methods

Use either of the following items in the Bluetooth menu to register and establish the connection with a device.

•Select “BT-PHONE” or “BT-AUDIO” as the source to operate the Bluetooth menu.

OPEN Make the unit ready to establish a new Bluetooth connection.

Connection is established by operating the Bluetooth device.

SEARCH Make the unit ready to establish a new Bluetooth connection.

Connection is established by operating the unit.

2Select “NEW.”
3Select “OPEN.”

4Enter a PIN (Personal Identification Number) code to the unit.

• You can enter any number you like (1-digit to

16-digit number). [Initial: 0000]

*Some devices have their own PIN code. Enter the specified PIN code to the unit.

1Move to the next (or previous) number position.
Registering using “OPEN”
Preparation

Operate the device to turn on its Bluetooth function.

1Select “BT-PHONE” or “BT-AUDIO.”
2Select a number or blank space.
3Repeat steps 1and 2until you finish entering a PIN code.
4Confirm the entry.

“OPEN...” flashes on the display.

Continued on the next page

EXTERNAL DEVICES 31