JVC KD-DV7307, KD-DV7308 Searching for available devices, Connecting a special device, Deleting a registered device, Select, Select, connect, 1Select “SEARCH.”, 1Select “SPECIAL.”

	5 Use the Bluetooth device to search and
ENGLISH	connect.
	On the device to be connected, enter the same PIN
	code you have just entered for this unit. “CONNECT”
	appears on the display.
	Now connection is established and you can use the
	device through the unit.
	The device remains registered even after you
	disconnect the device. Use “CONNECT“ (or activate
	“AUTO CNT”) to connect the same device from next
	time. (See the following and page 48.)

Searching for available devices

Perform steps 1 and 2 on page 31, then...

1Select “SEARCH.”

The unit searches and displays the list of the available devices.

•If no available device is detected, “UNFOUND” appears.

2Select a device you want to connect.

3Enter the specific PIN code of the device to the unit.

•Refer to the instructions supplied with the device to check the PIN code.

4Use the Bluetooth device to connect.

Now connection is established and you can use the device through the unit.

Connecting a special device

Perform steps 1 and 2 on page 31, then...

1Select “SPECIAL.”

The unit displays the list of the preset devices.

2Select a device you want to connect.

3Use “OPEN’ or “SEARCH’ to connect.

Connecting/disconnecting a registered device

1Select “BT-PHONE” or “BT-AUDIO.”

2Select a registered device you want to connect/disconnect.

3Select “CONNECT” or “DISCNNCT” to connect/ disconnect the selected device.

You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “AUTO CNT” on page 48.)

Deleting a registered device

1Select “BT-PHONE” or “BT-AUDIO.”

2Select a registered device you want to delete.

3Select “DELETE,” then “YES” to delete the selected device.

32