Symptom

Remedy/Cause

 

 

 

 

Video/MP3/WMA/AAC/

deviceUSBand

• “PLEASE” and “EJECT” appear alternately

• Insert a disc that contains tracks encoded in an

 

 

 

 

on the display while listening to a disc.

appropriate format.

 

 

• “NO FILE” or “NO USB” appears on the

• Connect a USB device that contains tracks encoded in

 

 

display while listening to a USB device.

an appropriate format.

 

 

 

• The total number of tracks recorded on the USB device

 

 

 

could not be accessed properly.

DivX/MPEG

WAV

• Correct characters are not displayed (e.g.

number of symbols.

 

 

This unit can only display letters (Roman and Cyrillic

 

 

album name).

alphabets—upper case), numbers, and a limited

 

 

 

 

 

 

• Bluetooth device does not detect the unit.

The unit can be connected with one Bluetooth cellular

 

 

 

phone and one Bluetooth audio device at a time.

 

 

 

While connecting a device, this unit cannot be detected

 

 

 

from another device. Disconnect currently connected

 

 

 

device and search again.

 

 

• The unit does not detect the Bluetooth

• Check the Bluetooth setting of the device.

 

 

device.

• Search from the Bluetooth device. After the device

 

 

 

detects the unit, select “OPEN” on the unit to connect

 

 

 

the device. (See page 31.)

 

 

• The unit does not make pairing with the

• Enter the same PIN code for both the unit and target

 

 

Bluetooth device.

device.

*

 

• Select the device name from “SPECIAL,” then try to

 

connect again. (See page 32.)

Bluetooth

 

• Echo or noise occurs.

Adjust the microphone unit position.

 

 

 

 

• Phone sound quality is poor.

• Reduce the distance between the unit and the

 

 

 

Bluetooth audio device.

 

 

 

• Move the car to a place where you can get a better

 

 

 

signal reception.

 

 

• The sound is interrupted or skipped

• Reduce the distance between the unit and the

 

 

during playback of a Bluetooth audio

Bluetooth audio device.

 

 

device.

• Disconnect the device connected for “BT-PHONE.”

 

 

 

• Turn off, then turn on the unit.

 

 

 

• (When the sound is not yet restored,) connect the

 

 

 

device again.

 

 

• The connected audio device cannot be

Check whether the connected audio device supports

 

 

controlled.

AVRCP (Audio Video Remote Control Profile).

 

 

 

 

*For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

Continued on the next page

ENGLISH

REFERENCES 59