ENGLISH

More about this unit

General

Turning on the power

•By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.

FM/AM/RDS

Storing stations in memory

•During SSM search...

–Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

–When SSM is over, the station stored in No. 1 will be automatically tuned in.

•When storing stations, the previously preset stations are erased and stations are stored newly.

FM RDS operations

•Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network-Tracking Reception will not operate correctly.

•If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level.

•When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception. (See page 44.)

•If you want to know more about RDS, visit <http://www.rds.org.uk>.

Disc/USB

General

•In this manual, words “track” and “file” are interchangeably used.

•This unit can also play back 8 cm discs.

•This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc.

•This unit can display only one-byte characters. No other characters can be correctly displayed.

•When a disc is inserted upside down, “PLEASE” and “EJECT” appear alternately on the display. Press 0to eject the disc.

•If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. Playback starts automatically.

•After ejecting a disc or removing a USB device, “NO DISC” or “NO USB” appears and you cannot operate some of the buttons. Insert another disc, reattach a USB device, or press SRC to select another playback source.

•If you change the source, playback also stops.

Next time you select the same source again, playback starts from where it has been stopped previously.

•While playing from a USB device, the playback order may differ from other players.

•This unit is compatible with the USB Full-Speed.

•Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

•When connecting a USB device, refer also to its instructions.

•Connect one USB device to the unit at a time. Do not use a USB hub.

•If the connected USB device does not have the correct files, “NO FILE” appears.

50