JVC KD-DV7307, KD-DV7308 General settings—PSM, DAB, iPod or D. player, Setup menu, WAIT, ERROR, RESET, UNFOUND, LOADING, Notice:

Warning messages for Bluetooth operations

ERR CNCT	The device is registered but the
(Error	connection has failed. Use “CONNECT”
Connection)	to connect the device again. (See page
	32.)
ERROR	Try the operation again. If “ERROR”
	appears again, check if the device
	supports the function you have tried.
UNFOUND	No available Bluetooth device is
	detected by “SEARCH.”
LOADING	The unit is updating the phone book
	and/or text messages.
WAIT	The unit is preparing to use the
	Bluetooth function. If the message does
	not disappear, turn off and turn on the
	unit, then connect the device again (or
	reset the unit).
RESET 8	Check the connection between the
	adapter and this unit.

Notice:
When operating an iPod or a D. player, some	ENGLISH
operations may not be performed correctly or as
intended. In this case, visit the following JVC web
site:
For iPod users: <http://www.jvc.co.jp/english/
car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>

General settings—PSM

•“AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, change the “DIMMER” setting to any other than “AUTO.”

•If you change the “AMP GAIN” setting from

“HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOL 30,” the unit automatically changes the volume level to “VOL 30.”

DAB

•Only the primary DAB service can be preset even when you store a secondary service.

•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.

iPod or D. player

•When you turn on this unit, the iPod or D. player is charged through this unit.

•While the iPod or D. player is connected, all operations from the iPod or D. player are disabled. Perform all operations from this unit.

•The text information may not be displayed correctly.

•If the text information includes more than 8 characters, it scrolls on the display. This unit can display up to 40 characters.

Setup menu

•When the language you have selected is not recorded on a file, the original language is automatically used as the initial language. In addition, the initial languages settings will not work as you set due to their internal programming.

•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTERBOX” for some discs.

Continued on the next page

REFERENCES 53