JVC KD-LH3100, KD-LH3150 manual Press the number button to select the sound mode you want

ENGLISH

2 Press the number button to select the sound mode you want.

•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).

Press 5 (up) or ∞(down).

Ex.: When you press number button 1 to select “Country”

To cancel the sound mode, select “FLAT” in step 2.

Note:

For details about the preset settings of each sound mode, see page 56.

To exit from the sound mode selection

screen, press EQ (equalizer) repeatedly or wait for about 5 seconds.

Storing your own sound modes

You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2, and USER 3).

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press EQ (equalizer).

The last selected sound mode is called up.

The next-step-operation buttons start flashing.

2 Select the sound mode you want to adjust.

Ex.: When you select “Country”

3 Enter the sound adjustment mode.

The following sound mode adjustment

screen appears on the

display.

4 Make adjustments as you like.

1)Press ¢ or 4 to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz.

30