JVC KD-LH3150, KD-LH3100 manual Troubleshooting, Symptoms Causes Remedies, General, Playback, Disc

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes	Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and connections.
General	•	This unit does not work	The built-in microcomputer may	Press the reset button on the
		at all.	have functioned incorrectly due	panel holder after detaching the
			to noise, etc.	control panel. (The clock setting
				and preset stations stored in
				memory are erased.)
				(See page 2.)
	•	“Panel Connect Error”	The control panel is not attach	Remove the control panel, wipe
		appears on the display.	correctly and firmly.	the connectors, then attach it
				again. (See page 47.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does
		not work.
	•	Static noise while	The antenna is not connected	Connect the antenna firmly.
		listening to the radio.	firmly.
	•	Disc cannot be played	Disc is inserted upside down.	Insert the disc correctly.
		back.
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/CD-RW.
		played back.		• Finalize the CD-R/CD-RW
	• Tracks on the CD-R/			with the component which
		CD-RW cannot be		you used for recording.
		skipped.
	•	Disc cannot be ejected.	Disc is locked.	Unlock the disc. (See page 19.)
Playback
	• Disc cannot be		The CD player may function	While holding CD/CD-CH (LINE)
		recognised (“No Disc,”	incorrectly.	(for KD-LH3150) or CD/CD-CH
		“Loading Error,” or “Eject		(for KD-LH3100), press SEL for
		Error” flashes on the		more than 2 seconds to eject
Disc
		display.)		the disc.
	•	Disc sound is sometimes	You are driving on rough roads.	Stop playback while driving on
		interrupted.		rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and connections.
	•	“No Disc” flashes on the	No disc in the loading slot.	Insert a disc into the loading slot.
		display.
			Disc is inserted incorrectly.	Insert the disc correctly.

ENGLISH

57