JVC KD-LH917 Using the standby receptions, TA Standby Reception, PTY Standby Reception, 2Select “PTY.”, To activate TA Standby Reception, Enter the MODE menu (see page 5)

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM.

•If a station starts broadcasting a traffic announcement, “Traffic News” appears on the display, and this receiver temporarily tunes in to the station. The volume changes to the preset TA volume level (see page 36).

To activate TA Standby Reception

PTY Standby Reception

PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY programme from any source other than AM.

•This function also takes effect for the DAB tuner.

To select your favorite PTY code for PTY Standby Reception, see page 36.

The PTY indicator either lights up or flashes.

To activate the PTY Standby Reception

1Enter the MODE menu (see page 5).

2Select “PTY.”

ENGLISH

TP indicator appears.

•If the TP indicator lights up, TA Standby Reception is activated.

• If the TP indicator flashes, TA Standby	3 Select one of the PTY codes (see page
Reception is not yet activated. (This occurs	14).
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
To activate TA Standby Reception, tune in to
another station (or service) providing these
signals. The TP indicator will stop flashing
and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

To be continued...

15