JVC KD-LH917 Inserting a disc, Playing a disc/SD card, Playing a CD-Ror CD-RW

Inserting a disc

•When a disc is inserted upside down, the control panel moves down, and the disc automatically ejects from the loading slot.

•If you keep the control panel open for about 1 minute, (beep sound when the “Beep” setting is turned “On”—see page 37) the control panel returns to its previous position.

•Do not insert 8 cm discs (single CD) and unusual shape discs (heart, flower, etc.) into the loading slot.

Playing a disc/SD card

•While playing an audio CD: If a title has been assigned to the audio CD (see page 41), it will be shown on the display.

•While fast-forwarding or reversing on an MP3 or WMA track, you can only hear intermittent sounds.

•While playing an SD card, the playback order may differ from other SD players.

•This receiver may be unable to play back some SD card due to their characteristics or recording conditions.

•This receiver cannot play back mini SD card and MMC.

•If the inserted SD card does not have the correct files, “SD” is skipped.

Playing a CD-R or CD-RW

•Use only “finalized” CD-Rs or CD-RWs.

•This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files.

•This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•Some CD-Rs or CD-RWs may not play back on this receiver because of their disc characteristics, and for the following causes:

–Discs are dirty or scratched.

–Moisture condensation occurs on the lens inside the receiver.

–The pickup lens inside the receiver is dirty.

–CD-R/CD-RW on which the files are written with “Packet Write” method.

–Improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.).

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

•Do not use the following CD-Rs or CD-RWs:

–Discs with stickers, labels, or protective seal stuck to the surface.

–Discs on which labels can be directly printed by an ink jet printer.

Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs.

ENGLISH

To be continued....

51