JVC KD-LH917 Using the standby reception, Road Traffic News Standby, 2Select “Announce.”, 4 Exit from the setting, 3 Select an announce type, Announcement Standby Reception

Using the standby reception

You can use three types of Standby Reception.

•Road Traffic News Standby Reception—TA Standby Reception (see the following).

•Announcement Standby Reception (see the right column)

•PTY Standby Reception (see page 48).

To activate the Announcement Standby Reception

1Enter the MODE menu (see page 5).

2Select “Announce.”

ENGLISH

Road Traffic News Standby	3 Select an announce type.
Reception (TA Standby Reception)

Road Traffic News Standby Reception allows the receiver to switch temporarily to the Road Traffic News (or Traffic Announcement) from any source other than AM. The volume changes to the preset TA volume level (see page 36).

•Operations are exactly the same as explained on page 15 for FM RDS stations.

•You cannot use Road Traffic News Standby

Reception (TA Standby Reception) separately for the DAB tuner and FM tuner.

Announcement Standby Reception 4 Exit from the setting.

Announcement Standby Reception allows the receiver to switch temporarily to your favorite service (announcement type).

To select your favorite announcement type,

see page 37.

ANN indicator appears.

• If the ANN indicator lights up, Announcement Standby Reception is activated.

• If the ANN indicator flashes, Announcement Standby Reception is not yet activated.

To activate, tune in to another service providing these signals. The ANN indicator will stop flashing and remain lit.

To be continued...

47