JVC KD-LH917 Troubleshooting, Causes, Symptoms, Remedies

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

	Symptoms	Causes	Remedies
	• Sound cannot be heard	The volume level is set to	Adjust it to the optimum
	from the speakers.	the minimum level.	level.
		Connections are incorrect.	Check the cords and
			connections.
	• The receiver does not	The built-in microcomputer	Reset the receiver (see page
General	work at all.	may have functioned	2).
		incorrectly due to noise, etc.
	• “Connect Error” appears	The control panel is not	Remove the control panel,
	on the display.	attached correctly.	wipe the connector, then
			attach it again (see pages 42
			and 49).
	• “Push Reset” appears	Something is blocking the	Reset the receiver (see page
	on the display and the	control panel movement.	2). If this does not work,
	control panel movement is		check the installation.
	freezed.
FM/AM	• SSM automatic presetting	Signals are too weak.	Store stations manually.
	does not work.
	• Static noise while listening	The aerial is not connected	Connect the aerial firmly.
	to the radio.	firmly.
	• CD-R/CD-RW cannot be	CD-R/CD-RW is not	• Insert a finalized CD-R/
	played back.	finalized.	CD-RW.
	• Tracks on the CD-R/		• Finalize the CD-R/CD-RW
	CD-RW cannot be		with the component which
	skipped.		you used for recording.
	• Disc cannot be ejected.	Disc is locked.	Unlock the disc (see page 23).
playback
	• Disc cannot be recognized	The CD player may have	Eject the disc forcibly (see
	(“No Disc,” “Loading	functioned incorrectly.	page 4).
Disc	Error,” or “Eject Error”
	flashes).
	• Disc sound is sometimes	You are driving on rough	Stop playback while driving
	interrupted.	roads.	on rough roads.
		Disc is scratched.	Change the disc.
		Connections are incorrect.	Check the cords and
			connections.

54