Using Bluetooth® devices

Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other.

By connecting the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of this unit, you can operate a Bluetooth device using this unit.

Once the USB Bluetooth Adapter is attached, this unit is always available for pairing.

Only one USB Bluetooth Adapter can be detected at a time.

KS-UBT1 is initially inserted to the rear USB cable of this unit.

Refer also to the instructions supplied with the Bluetooth device.

Refer to page 4 of the Installation/Connection Manual (separate volume) to check the countries where you may use the Bluetooth function.

This unit supports the following Bluetooth profiles

HFP (Hands-Free Profile) 1.5

OPP (Object Push Profile) 1.1

PBAP (Phonebook Access Profile) 1.0

A2DP (Advanced Audio Distribution Profile) 1.2

AVRCP (Audio/Video Remote Control Profile) 1.3

Additional information

If you wish to perform complicated operations (such as dialing the numbers, using phonebook, etc.), stop your car in a safe place.

Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.

If you connect a different USB Bluetooth Adapter, all the registered devices and information will be cleared.

This unit may not work for some Bluetooth devices.

Connecting condition may vary depending on the circumstances around you.

If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.

When the unit is turned off, the device is disconnected.

If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/index.html> (English website only).

ENGLISH 11