Connecting a Bluetooth device
When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device.
•Once the connection is established, it is registered in the unit even if you reset the unit. Up to five devices can be registered in total. “Pairing Full” appears if you try to pair the 6th device.
•This unit supports Secure Simple Pairing (SSP).
•Pairing sequence may be different from what is described below.
•A maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time.
1 |
|
|
| If “Now Pairing...” appears... | ||
|
|
|
| |||
|
|
|
| ]Operate the Bluetooth device to | ||
| ]Turns on the power. |
| accept. |
| ||
|
|
|
| |||
2 |
|
|
| If “Now Pairing... PIN code: 0000” | ||
| USB input terminal | appears... |
| |||
|
|
| ||||
|
|
|
| ]Enter a PIN (Personal Identification | ||
|
|
|
| Number) code to the Bluetooth device. | ||
|
|
|
| • You can change the PIN code of your choice | ||
|
| or |
| before pairing. (page 17) [ Initial: 0000 ] | ||
|
|
| (B) If the following appear on the | |||
|
|
|
| |||
USB cable from the |
|
| display: |
| ||
|
|
|
| |||
rear of the unit | Pairing ? | Pairing ? | ||||
|
| Device: [Device name] | Yes: Press VOL | |||
|
|
|
| |||
| ]Make sure USB Bluetooth Adapter | Passkey: XXXXXX | No: Press BACK | |||
| ]Check to be sure the passkey appears | |||||
| is connected to one of the USB input | |||||
| on the unit and Bluetooth device is the | |||||
| terminals. |
|
| |||
|
|
| same. Then, confirm the passkey on the | |||
3 | Use the Bluetooth device to search and | |||||
unit by pressing the control dial. Operate | ||||||
| select “JVC Unit.” |
| the Bluetooth device to confirm the | |||
| • For some Bluetooth devices, you may | |||||
| passkey. |
| ||||
| need to enter the PIN code first after |
| ||||
| • “XXXXXX” is a | |||||
4 | search. |
|
| appear in different combination (even if the | ||
Perform one of the following pairing | device is the same) each time pairing is made. | |||||
| operations (what appear depends on the | 5 After pairing is successful, the unit will | ||||
| Bluetooth device pairing process). | establish Bluetooth connection with the | ||||
| (A) If the following appear on the | Bluetooth device*. (“Pairing COMPLETED” | ||||
| display: |
|
| appears and lights up on the display.) | ||
|
|
| Pairing ? | • The device remains registered even | ||
| Pairing ? |
| after you disconnect the device. Use | |||
|
| Yes: Press VOL | ||||
| Device: [Device name] | No: Press BACK | <Connect Phone/ Connect Audio> (or | |||
|
|
| ||||
|
|
|
| activate <Auto Connect>, page 17) to | ||
|
|
|
| connect the same device from next time | ||
|
|
|
| on. |
| |
| ]Select “Yes” to start the pairing | * Some devices may not be able to connect to the | ||||
| unit after pairing. Connect the device to the | |||||
| process. |
|
| unit manually. |
|
12ENGLISH