To delete a contact (name/phone number)

Only when “In Unit” is selected for “Phonebook Select”. (page 14)

1Press to enter “HF Menu” screen.

2 Display the list of name/phone numbers using one of the calling methods. (page 13)

3 Turn the control dial to select the name/ phone number you want to delete.

4 Press and hold BACK to enter the “Delete Entries” screen.

5 Turn the control dial to select “Delete” or “Delete All.”

•If “Delete” is selected, the selected name/ phone number in step 3is deleted.

•If “Delete All” is selected, the listed numbers in step 2selection are deleted.

6Press the control dial to confirm.

Receiving/ending a phone call

When a call comes in, the source is automatically changed to “BT FRONT/ BT REAR.”

•“Receiving... [Phone number/name]” appears on the display.

•The display will flash in blue. (“Ring Color,” page 14)

When <Auto Answer> is activated....

The unit answers the incoming calls automatically.

•Press or the control dial to answer the incoming call when <Auto Answer> is deactivated.

During a phone call conversation...

•Turn the control dial to adjust the phone volume level [ 00 – 50 ]. [ Initial: VOL 15 ]

The adjustment made will not affect the other sources.

•Press 5/∞ to adjust the microphone sensitivity [ 1 – 3 ]. (As the number increases, the microphone becomes more sensitive.)

•Press 4/¢ to turn on/off the Noise Reduction and Echo Cancelation mode.

To end an incoming call, press and hold

or the control dial.

Using the remote controller

5/∞/2/3/SOURCE: [Press] Answers calls. [Hold] Rejects calls.

To switch conversation media (the unit/ mobile phone)

Press the control dial during a phone call conversation, then continue your conversation using the other media.

•Operations may be different according to the connected Bluetooth device.

To switch between two connected mobile phones

When two mobile phones are connected to the unit, you can access to both “HF Menu” screens.

Press to access to the 1st phone’s

“HF Menu” screen, press again to access to the 2nd phone’s “HF Menu” screen.

•To return to the 1st phone’s “HF Menu” screen, press BACK.

Arriving of a text message

When a text message comes in, the unit rings if your mobile phone is compatible with text message and “Message Notice” is set to “On.” (page 14)

•“Received Message” appears and the display illuminates in blue. (“Ring Color,” page 14)

•You cannot read, edit, or send a message through the unit.

ENGLISH 15