If “Settings” is selected in step 2...

Turn the control dial to select an item (see the following), then press the control dial to confirm.

The following settings are applicable to the paired device. If another device is paired, make the settings again.

•Phonebook Select*

In Phone [Initial] : The unit browses the phonebook of the connected phone.

In Unit : The unit browses the phonebook registered in the unit. (To copy the phonebook memory, see <Phonebook Trans> on page 17.)

•If the phonebook contains many numbers, you can fast search (±10, ±100, ±1 000) through the phonebook by turning the control dial quickly.

•To search through the phonebook, see the right

column.

*Selectable only when the connected phone supports PBAP.

•Auto Answer

On : The unit answers the incoming calls

automatically. / Off [Initial] : The unit does not

answer the calls automatically. Press or the control dial to answer.

•Ringing Tone

In Unit [Initial] : The unit rings to alert you when a call/Text Message comes in.

– Call : Select your preferred ring tone when a call comes in [ Tone 1 — 5 ].

– Message : Select your preferred ring tone when a text message comes in [ Tone 1 — 5 ].

• Default ring tone is different according to the paired device.

In Phone : The unit rings using the connected phones’ ring tone to alert you when a call/Text Message comes in. (The connected mobile phone rings if it does not support this feature.)

•Ring Color

29 preset colors [ Initial: Color 06 ] : When a call/text message comes in, the display will flash in the selected color. (The display will change to the original color when the call is answered or the incoming call stops.) / Off : Cancels.

•NR/EC Mode

On [Initial] : The unit adjusts the Noise Reduction and Echo Cancellation of the microphone connected to the unit for clearer sound. /

Off : Cancels.

•MIC Setting

Adjust the sensitivity [ Level 01/ 02/ 03 ] of the microphone connected to the unit.

[ Initial: Level 02 ]

•Message Notice

On [Initial] : The unit informs you of the arrival of a message by ringing and displaying “[Device name] Received Message” / Off : The unit does not inform you of the arrival of a message.

To select a contact from the phonebook

1Select “Phonebook” calling method. (page 13)

2Press 5/∞ to show the search menu (A to Z, 0 to 9, and OTHERS).

“OTHERS” appears if the 1st character is not A to Z, or 0 to 9, such as #, —, !, and etc.

3Press 5/∞ to select your desired character, then press the control dial to confirm.

The name list of the selected character appears.

4Turn the control dial to select your desired contact, then press to confirm.

•Only the existing characters will be shown on the search menu.

•Press and hold 5/∞ to continuously change the character of the search menu.

•If your phonebook contains many contacts, searching may take some time.

14ENGLISH