Menu item

Selectable setting, [ Initial: Underlined ]

 

 

 

 

 

 

 

 

Fad/Bal *7, *8

Fad (fader) : F6 — R6 [ 0 ] : Press 5/to adjust the front and rear speakers output

 

 

 

 

balance. / Bal (balance) : L6 — R6 [ 0 ] : Press 4 / ¢ to adjust the left

 

 

 

 

and right speakers output balance.

 

 

 

 

 

 

 

 

Loud

On : Boost low and high frequencies to produce a well-balanced sound at a low volume

 

 

 

 

level. / Off : Cancels.

 

 

 

 

 

 

 

 

Volume

Level –5 — Level +5 [ Level 0 ] : Presets the volume adjustment level of

 

 

 

Adjust

each source (except “FM”), compared to the FM volume level. The volume level will

 

 

 

 

automatically increase or decrease when you change the source. Before adjustment, select

 

 

 

 

the source you want to adjust. (“FIX” appears on the display if “FM” is selected as the

 

 

 

 

source.)

 

 

 

 

 

 

 

 

Subwoofer

On : Turns on the subwoofer output. / Off : Cancels.

 

 

 

On/Off

 

 

 

 

 

 

 

Audio

 

Subwoofer

LOW 55Hz / MID 85Hz / HIGH 120Hz : Frequencies lower than 55 Hz/ 85 Hz/

 

 

LPF *9

120 Hz are sent to the subwoofer. / Off : Deactivates (all signals are sent to the rear

 

 

 

 

 

 

 

speakers).

 

 

 

 

 

 

 

 

Subwoofer

Level 00 — Level 08 [ Level 04 ] : Adjusts the subwoofer output level.

 

 

 

Level *9

 

 

 

 

Subwoofer

0 Deg (normal) / 180 Deg (reverse) : Selects the subwoofer phase.

 

 

 

Phase *9

 

 

 

 

HPF

LOW 62Hz / MID 95Hz / HIGH 135Hz : Activates the High Pass Filter.

 

 

 

 

Frequencies lower than 62 Hz/ 95 Hz/ 135 Hz are cut off from the front/rear speakers. /

 

 

 

 

Off : Deactivates (all signals are sent to the front/rear speakers).

 

 

 

 

 

 

 

 

Beep

On / Off : Activates or deactivates the keypress tone.

 

 

 

 

 

 

 

 

Amplifier

Low Power : Vol 0 – Vol 30 (Selects if the maximum power of each speaker is less

 

 

 

Gain*10

than 50 W to prevent damaging the speakers.) / High Power : Vol 0 – Vol 50 /

 

 

 

 

Off : Deactivates the built-in amplifier.

 

 

 

 

 

 

 

 

SSM

Displayed only when the source is “FM” or “HD RADIO.” For settings, see page 7.

 

 

 

 

 

 

 

 

Area Change

US : When using in North/Central/South America. AM/FM intervals are set to

 

Tuner

 

 

10 kHz/200 kHz. / EU : When using in any other areas. AM/FM intervals are set to

 

 

 

50 kHz. AM interval is set to 10 kHz.

 

 

 

 

9 kHz/50 kHz. / SA : When using in South American countries where FM interval is

 

 

 

 

 

 

 

 

IF Band

Auto : Increases the tuner selectivity to reduce interference noises between adjacent

 

 

 

 

stations. (Stereo effect may be lost.) / Wide : Subject to interference noises from adjacent

 

 

 

 

stations, but sound quality will not be degraded and the stereo effect will remain.

 

 

 

 

*7

If you are using a two-speaker system, set the fader level to <00>.

*8

This adjustment will not affect the subwoofer output.

*9

Displayed only when <On> is selected for <Subwoofer On/Off>.

*10 The volume level automatically changes to “Vol 30” if you change to <Low Power> with the volume level set higher than “Vol 30.”

28ENGLISH