
ENGLISH
Assigning names to the sources
You can assign names to station frequencies, CDs and the external components.
After assigning a name, it will appear on the display when you select the source.
Sources | Maximum number of |
| the characters |
Station frequencies | up to 10 characters (up to |
| 30 station frequencies |
| including both FM and AM) |
|
|
CDs* | up to 32 characters |
| (up to 40 discs) |
|
|
External components | up to 10 characters |
(LINE INPUT and |
|
AUX INPUT) |
|
|
|
*You cannot assign a name to a CD Text or an MP3 disc.
1 Select a source you want to assign a name to.
Each time you press the button, the source changes
as described on page 7.
2 Press and hold SEL (select) for more than 2 seconds while pressing DISP (D).
3 Select the character set you want while
“” is flashing.
Each time you press the button, the character set changes as follows:
Capital letters ( 



)
Small letters ( 



)
Numbers and symbols ( 



) 
4 Select a character.
About the available characters, see page 35.
5 Move the cursor to the next
(or previous) character position.
6
7 Finish the procedure while the last selected character is flashing.
To erase the input characters
Insert spaces using the same procedure described above.
When you select an FM station as the source
Notes:
• When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
• When the CD changer is connected, you can assign names to discs in the CD changer. These names can also be shown on the display if you insert the discs in this unit.
28