| Manual preset | |
| ENGLISH | ||
Ex.: Storing an FM station of 88.3 MHz into the | ||
| You can preset up to 6 stations in each band (FM1, | |
| FM2, FM3 and AM) manually. | |
| preset number 1 of the FM1 band | |
| ||
| 1 Select the band (FM1 – 3, AM) you | |
| want to store stations into (in this | |
| example, FM1). |
FM1 
FM2 
FM3
AM
2 Tune in to a station (in this example, of 88.3 MHz).
Press ¢ 
to tune in to stations of higher frequencies.
Press 4 
to tune in to stations of lower frequencies.
3 Press and hold the number button (in this example, 1) for more than 2 seconds.
Notes:
•A previously preset station is erased when a new station is stored in the same preset number.
•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
Tuning in to a preset station
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 7 and 8.
1 Select the band (FM1 – 3, AM).
FM1 
FM2 
FM3
AM
2 Select the number (1 – 6) for the preset station you want.
MO | RPT |
“P 1” flashes for a few seconds.
4 Repeat the above procedure to store other stations into other preset numbers.
8
