JVC KS-F545 manual Playing the current tune repeatedly, Other convenient tape functions, English

Other convenient tape functions

Skipping the blank portions on the tape

You can skip blank portions between the tunes (Blank Skip).

When this function is on, the unit skips blank portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it.

•See also “Changing the general settings (PSM)” on pages 15 and 16.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 16.)

2 Press ¢ or 4 to select “B. SKIP (blank skip).”

3 Press + to select “ON.”

Now Blank Skip is activated.

4 Press SEL (select) to finish the setting.

To cancel Blank Skip, repeat the same procedure

and select “OFF” in step 3 by pressing –.

Playing the current tune repeatedly

You can play the current tune repeatedly (Repeat

Play).

To play back tracks repeatedly (Repeat Play)

MODE	1 Press MODE to enter the functions
	mode while playing a tune. This unit
	enters the functions mode.

RPT2 Press RPT (Repeat), while still in the functions mode, so that the RPT indicator lights up on the display.

Then, each time you press the button, repeat play mode turns on and off alternately.

Lights up when Repeat Play is turned on.

When the repeat mode is turned on, the RPT indicator lights up on the display.

Note:

In the following cases, Blank Skip and Repeat Play may not operate correctly:

–Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during tunes.

–Tapes with short non-recorded sections.

–Tapes with high level noise or humming between tunes.

–Tapes with tunes recorded at low recording levels.

ENGLISH

11