ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
4
5
Repeat step 2 and 3 to adjust the other items.
To turn on or off the loudness function.
• See pages 13 for details.
1 Call up the sound mode you want to adjust.
SCM | • See pages 13 for details. |
2 To adjust the bass or treble level.
Select “BAS” or “TRE”.
Ex.: When you select “TRE (treble)”
3 Adjust the bass or treble level.
• See pages 12 for details.
Equalization pattern changes as you adjust the bass or treble.
Ex.: When you adjust “TRE” (treble)
6 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
SCM
Your adjustment made for the selected sound mode is stored in memory.
7 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 13.
14